Auxiliary equipment NKP Mexanobr-texnika xxSG, xxFT, PE, PEU, PT, xxhRM, etc.

The thickener is designed for thickening suspensions with a density of up to 5 g /cm3 in laboratory conditions.

Models: 55SG.

Laboratory filters. Filtration of suspensions with a density of up to 5 g / cm3 in laboratory conditions in a periodic mode.

Models: 55FT, 56FT, 57FT.

Laboratory electrovibration feeders are used for uniform regulated material supply, and separators, crushers, sample dividers, screens.

Models: PE-1 (294PT), PT-1 (358PT), PT-0.3 (359PT).

Spring feeders (light) are designed for uniform adjustable feeding of various materials.

Models : PE 1,8×6, PE 1,8×5, PE 3,6×9, PE 3,6×9, PE 3,6×12.5, PE 3,6x12,5, PE 5×12, PE 5×12, PE 5×15, PE 5x15M, PE 5×16, PE 5x16, PE 5x18, PE 5x20, PE 7x18.

Spring feeders (heavy) are designed for uniform adjustable feeding of various materials.

Models: PE 7×18F, PE 7×23,5F, PE 10×15, PE 10×20, PE 10x30, PE 12×25, PE 12×25-V, PE 12×20, PE 14×25,5, PE 15×25.

Control units (cabinets) are designed to adjust the performance of vibration feeders.

Models: BUV-1TMv, BUVP-1TM, BUVN-1T-D, BUVN-2T-D, BUVN-1T-shr, BUVN-1T-D-shr, BUVN-1T-D-sh, BUVN-2T-D-sh, SHUVN-1TM, SHUVN-1T, SHUVN-1T-D, SHUVN-2T-D.

The reagent feeder is used for precise dosing of flotation reagents during pilot or enlarged laboratory tests.

Models: 159 PT.

A device for measuring the angle of natural slope of bulk material. Measurement of the angle of natural slope of bulk materials and for subsequent calculation of the coefficient of internal friction.

Models: 952RM.

The device for mixing small samples of bulk materials is used for mixing small samples and averaging samples of crushed mineral products before chemical analysis.

Models: 954RM.

Laboratory tables are used to install various equipment on them.

Models: tables 6x6, 7x10, 6x12.

Laboratory stands
Models: 601/602 (DSCH 60x100), 1001/1002 (DSCH 100x200), universal movable feeder rack.

Samplers. The efficiency of mining and processing enterprises depends to a large extent on the reliability and accuracy of information about the chemical composition and humidity of products transported in the form of pulp, that is, a mixture of mineral raw materials and water, between technological operations or coming out of processing processing.

Models: 63OP, 66OP, 66OP-01.

Laboratory demagnetizing devices are designed for demagnetization of pulps containing fine and finely ground ferrosilicon or natural magnetite in laboratory conditions, as well as in conditions of small production. Demagnetization of pulps is necessary to eliminate flocculation of highly magnetic particles in order to increase the efficiency of classification, deslamation, filtration, as well as during the regeneration of heavy ferromagnetic suspensions.

Models: AR-30.

A jigging machine is a mechanical device that allows you to enrich the ore of the extracted mineral by one of the gravitational methods — jigging. In this technology, enrichment — an increase in the concentration of a useful component — is carried out by separating denser minerals from less dense ones.

Models: 52OT.

Concentration tables are widely used in the enrichment of tin, tungsten, iron, rare metal and gold-bearing ores. You can also choose other models of equipment and auxiliary equipment for research laboratories.

Models: 51KTS.

The vat is designed for high-intensity conditioning of finely ground pulp in laboratory conditions.

Models: 119MSH.